02.08.2008, 12:40
|
#1 (permalink) |
     
Registriert seit: 01.07.2006
Ort: Kabul
Alter: 39
Beiträge: 2.666
|
Problem mit RHS_Mod v2.0
Hallo zusammen,
Ich habe folgendes Problem. Beim RHS_RF_Units&Weapons v2.0 Addon ist neben vielen tollen Einheiten und Waffen unter anderem auch ein AWM_[Arctic Warfare Magnum] / G22 Scharfschuetzengewehr dabei. Mein Problem besteht nun darin dass jedesmal wenn ich eine neue Mission starte / erstelle und ich dann im laufenden Spiel das erste mal mit der Waffe schiesse kommt ein Fehler und zwar: No entry 'bin\config.bin/CfgRecoils.Ska_RiffleprRecoil'. Kennt jemand von euch diesen Fehler oder weiss wie ich ihn beseitigen kann. Hoffe auf eure Hilfe. greetz Moerderhoschi Geändert von Moerderhoschi (02.08.2008 um 13:44 Uhr). |
|
|
|
02.08.2008, 17:05
|
#2 (permalink) |
|
Registriert seit: 09.01.2008
Beiträge: 1.599
|
Anscheinend wird mit dem Patch 1.14 mehr geprüft als vorher. Ähnlicher Effekt mit dem SLX-Mod. Da fehlt der recoil-Eintrag für die Snipers. Du kannst entweder das Addon auspacken und das selber fixen, oder auf einen neuen Release von RHS warten.
 Wenn Du's selber fixen willst, musst Du nach folgendem Ausschau halten: Code:
...class cfgRecoils {
pistolBase = {0, 0, 0, 0.080000, 0.003000, 0.020000, 0.050000, -0.003000, -0.033000, 0.050000, 0, 0};
Ska_RiffleprRecoil = {0, 0, 0, 0.060000, 0.005000, 0.005000, 0.050000, 0, -0.020000, 0.060000, -0.005000, 0.005000, 0.050000, 0, 0};
...
Code:
class AK74: Rifle {
scope = 2;
value = 0;
...
class Single: Mode_SemiAuto {
sound = {"\ca\Weapons\Data\Sound\AK74_1_SS_A", 10.000000, 1};
reloadTime = 0.100000;
recoil = "Ska_RiffleprRecoil";
recoilProne = "AK74Recoil";
dispersion = 0.002500;
|
|
|
|
|
02.08.2008, 22:56
|
#3 (permalink) |
|
Registriert seit: 01.07.2006
Ort: Kabul
Alter: 39
Beiträge: 2.666
|
Ich habe die Stelle gefunden, es sind beide eintraege vorhanden aber wahrscheinlich falsch.
Wie finde ich jetzt heraus _[ausser rumtesten] wie ich die recoil & recoilprone richtig bennen muss? Code:
class RHS_Single_AWM
{
sound[] = {"\RHS_Mag\Sounds\AWMs.ogg", 10.0, 1};
soundBurst = 1;
soundContinuous = 0;
displayName = "$STR_DN_MODE_SEMIAUTO";
multiplier = 1;
burst = 1;
dispersion = 0.00007125;
reloadTime = 2;
backgroundReload = 1;
recoil = "Ska_RiffleRecoil";
recoilProne = "Ska_RiffleprRecoil";
ffCount = 1;
ffMagnitude = 0.5;
ffFrequency = 11;
|
|
|
|
|
03.08.2008, 12:56
|
#4 (permalink) |
|
Registriert seit: 09.01.2008
Beiträge: 1.599
|
Es muss wohl noch eine Sektion mit den cfgRecoils geben. Da musst Du schauen, was zur AWM passt, die Zeile kopieren und vorne den Namen so umbenennen, wie in der Sektion von Dir.
Keine Angst, es gibt kaum was, was Du kaputt machen kannst. Probieren ist der beste Weg was zu lernen. 
|
|
|
|
|
03.08.2008, 16:04
|
#5 (permalink) |
|
Registriert seit: 01.07.2006
Ort: Kabul
Alter: 39
Beiträge: 2.666
|
Ich habe den Eintrag gefunden oder besser gesagt die Stelle an dem er sein sollte.
Es war ein andere .pbo Datei und zwar die fuer die Magazine. Habe die Daten jetzt einfach nachgetragen und die Werte vom SVD uebernommen, nun klappt alles wunderbar. nochmal danke fuer die Unterstuetzung. |
|
|
|
|
03.08.2008, 22:15
|
#7 (permalink) |
|
Registriert seit: 01.07.2006
Ort: Kabul
Alter: 39
Beiträge: 2.666
|
Man muss die Datei (config.cpp) im Addon RHS_Mag.pbo editieren.
config.cpp Standart: Code:
//////////////////////////////////////////////////////////CONFIG RECOILS/////////////////////////////////////////////////////////
class CfgRecoils
{
RHS_AK74_Recoil[]= {0,0,0,0.060000,0.01000,0.012,0.10,0,-0.020000,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AK74_prRecoil[]= {0,0,0,0.060000,0.0100,0.0100,0.10,0,-0.02000,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_AK74M_Recoil[]= {0,0,0,0.060000,0.01000,0.0100,0.10,0,-0.018,0.080000,-0.010000,0.005000,0.050000,0,0};
RHS_AK74M_prRecoil[]= {0,0,0,0.060000,0.0100,0.0080,0.10,0,-0.018,0.080000,-0.010000,0.005000,0.050000,0,0};
RHS_AK103_Recoil[]= {0,0,0,0.060000,0.01200,0.010,0.10,0,-0.02,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AK103_prRecoil[]= {0,0,0,0.060000,0.0120,0.008,0.10,0,-0.02,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_AKM_Recoil[]= {0,0,0,0.065000,0.014,0.0165,0.10000,0,-0.0200,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AKM_prRecoil[]= {0, 0,0,0.065000,0.0140,0.012,0.10000,0,-0.02000,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74_Recoil[]= {0,0,0,0.070000,0.01100,0.011,0.10000,0,-0.02000,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74_prRecoil[]= {0,0,0,0.100,0.003000,0.005000,0.05000,-0.003000,-0.01000,0.050000,0,0};
RHS_RPK74M_Recoil[]= {0,0,0,0.070000,0.01100,0.010,0.10000,0,-0.01800,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74M_prRecoil[]= {0,0,0,0.100,0.003000,0.005000,0.05000,-0.003000,-0.01000,0.050000,0,0};
RHS_SVD_Recoil[]= {0,0,0, 0.070000,0.020,0.03,0.10,0,-0.020000,0.100000,0.050000,0,0};
RHS_SVD_prRecoil[]= {0,0,0, 0.070000,0.0140,0.018,0.10,0,-0.020000,0.100000,0.050000,0,0};
RHS_PKM_Recoil[] = {0,0,0,0.100000,0.030000, 0.040000,0.050000,-0.030000,-0.080000,0.050000,0,0};
RHS_PKM_prRecoil[] = {0,0,0,0.100000,0.003000,0.005000,0.050000,-0.003000,-0.010000,0.050000,0,0};
RHS_V94_Recoil[] = {0, 0, 0, 0.050000, 0.100000, 1, 0.025000, -0.010000, -0.015000, 0.025000, 0, 0};
RHS_V94_prRecoil[] = {0, 0, 0, 0.050000, 0.060000, 0.002500, 0.025000, -0.110000, -0.005000, 0.025000, 0, 0};
};
Code:
//////////////////////////////////////////////////////////CONFIG RECOILS/////////////////////////////////////////////////////////
class CfgRecoils
{
RHS_AK74_Recoil[]= {0,0,0,0.060000,0.01000,0.012,0.10,0,-0.020000,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AK74_prRecoil[]= {0,0,0,0.060000,0.0100,0.0100,0.10,0,-0.02000,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_AK74M_Recoil[]= {0,0,0,0.060000,0.01000,0.0100,0.10,0,-0.018,0.080000,-0.010000,0.005000,0.050000,0,0};
RHS_AK74M_prRecoil[]= {0,0,0,0.060000,0.0100,0.0080,0.10,0,-0.018,0.080000,-0.010000,0.005000,0.050000,0,0};
RHS_AK103_Recoil[]= {0,0,0,0.060000,0.01200,0.010,0.10,0,-0.02,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AK103_prRecoil[]= {0,0,0,0.060000,0.0120,0.008,0.10,0,-0.02,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_AKM_Recoil[]= {0,0,0,0.065000,0.014,0.0165,0.10000,0,-0.0200,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_AKM_prRecoil[]= {0, 0,0,0.065000,0.0140,0.012,0.10000,0,-0.02000,0.10000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74_Recoil[]= {0,0,0,0.070000,0.01100,0.011,0.10000,0,-0.02000,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74_prRecoil[]= {0,0,0,0.100,0.003000,0.005000,0.05000,-0.003000,-0.01000,0.050000,0,0};
RHS_RPK74M_Recoil[]= {0,0,0,0.070000,0.01100,0.010,0.10000,0,-0.01800,0.100000,-0.010000,0.010000,0.050000,0,0};
RHS_RPK74M_prRecoil[]= {0,0,0,0.100,0.003000,0.005000,0.05000,-0.003000,-0.01000,0.050000,0,0};
Ska_RiffleRecoil[]= {0,0,0, 0.070000,0.020,0.03,0.10,0,-0.020000,0.100000,0.050000,0,0};
Ska_RiffleprRecoil[]= {0,0,0, 0.070000,0.0140,0.018,0.10,0,-0.020000,0.100000,0.050000,0,0};
RHS_SVD_Recoil[]= {0,0,0, 0.070000,0.020,0.03,0.10,0,-0.020000,0.100000,0.050000,0,0};
RHS_SVD_prRecoil[]= {0,0,0, 0.070000,0.0140,0.018,0.10,0,-0.020000,0.100000,0.050000,0,0};
RHS_PKM_Recoil[] = {0,0,0,0.100000,0.030000, 0.040000,0.050000,-0.030000,-0.080000,0.050000,0,0};
RHS_PKM_prRecoil[] = {0,0,0,0.100000,0.003000,0.005000,0.050000,-0.003000,-0.010000,0.050000,0,0};
RHS_V94_Recoil[] = {0, 0, 0, 0.050000, 0.100000, 1, 0.025000, -0.010000, -0.015000, 0.025000, 0, 0};
RHS_V94_prRecoil[] = {0, 0, 0, 0.050000, 0.060000, 0.002500, 0.025000, -0.110000, -0.005000, 0.025000, 0, 0};
};
Ich habe die recoil-(rueckstoß) werte vom SVD Dragunov Scharfschuetzengewehr uebernommen. |
|
|
|
 |
| Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1) | |
| Themen-Optionen | |
| Ansicht | |
|
|
Linear-Darstellung
